The DSE4520 MKII is a compact Auto Mains (Utility) Failure Control Module that has been developed to provide an outstanding range of features within a compact enclosure.
THE MODULE CAN BE CONFIGURED FOR USE AS AN AUTO START CONTROL MODULE.
OVERALL SIZE
140 mm x 113 mm x 43 mm (5.5” x 4.4” x 1.5”)
PANEL CUTOUT SIZE
118 mm x 92 mm (4.6″ x 3.6″)
MAXIMUM PANEL THICKNESS
8.0 mm (0.3”)
WEIGHT
0.26kg
PRODUCT VARIANTS
4520-05 – 4520 Auto Mains (Utility) Failure Control Module (Ct, Rtc)
KEY FEATURES | KEY BENEFITS |
| Configurable for use as an AMF or Auto Start Control Module. | Delivers outstanding flexibility. Customers only need to stock one part for multiple applications. |
| CAN & alternator speed sensing. | Provides full monitoring flexibility. |
| Largest back-lit display in its class | Provides clear and easy to read information pages. |
| Heated display option. | Ensures the display continues to operate in extreme cold weather conditions. |
| Backed-up real time clock. | Ensures data is not lost when module is disconnected from its power source. |
| Fully configurable via DSE Configuration Suite PC Software | Provides complete user-friendly configuration and easy-to-use high-level system control & monitoring. |
| Power save mode. | Minimises battery drain when the system is not in use. |
| 3-phase generator and mains (utility) sensing. | Provides true generator and mains (utility) sensing. |
| 600 V ph-ph nominal system compatibility. | Provides global flexibility. |
| Generator & load power monitoring (kW, kV A, kV Ar, pf). | Provides clear accurate power measurement information. |
| Accumulated power monitoring (kW h, kVA h, kVAr h). | Provides a true indication of the amount of energy the generator has provided. |
| Generator overload protection (kW). | Provides engine overload protection. |
| Generator/load current monitoring & protection. | Protects generator against overload. |
| Fuel and start outputs (configurable on CAN). | Provides multiple installation options. |
| 5 V output. | A single digital output is available to power senders. |
| Text mode. | Users can configure the module to show text instead of the standard icon based display. |
| Compatible with a wide range of senders. | Accommodates a wide range of senders and temperatures.. |
| Configurable fuel and crank outputs. | Provides increased flexibility for multiple applications. |
| Improved engine maintenance through coolant temperature. | Enhancements have been made to the engine coolant temperature to include a pre alarm for advanced warning. |
| Load unbalanced alarm. | Provides protection against unbalanced loads damaging the alternator. |
ADDITIONAL FEATURES |
| Fuel solenoid pulling circuit |
| On-screen line diagram on/off functionality |
| Configurable CAN instrumentation (10) |
| Water in fuel digital input |
| Tank bund alarm digital input |
| Generator at rest output |
| ECU periodic wake-up for information retrieval |
| Back-light power-save mode |
| Adjustable delay crank timer |
| Pre/post heat functionality |
| Overload protection |
| Mains/generator A/C system selection |
| Output timer for external audible alarm |
CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous
CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking.
MAXIMUM OPERATING CURRENT
85 mA at 12 V, 96 mA at 24 V
MAXIMUM STANDBY CURRENT
51 mA at 12 V, 47 mA at 24 V
MAXIMUM SLEEP CURRENT
35 mA at 12 V, 32 mA at 24 V
MAXIMUM DEEP SLEEP CURRENT
<10 uA at 12 V, <10 uA at 24 V
VOLTAGE RANGE
15 V to 415 V AC (Ph to N)
26 V to 719 V AC (Ph to Ph)
FREQUENCY RANGE
3.5 Hz to 75 Hz
OUTPUT A (FUEL)
10 A short term, 5 A continuous,
at supply voltage
OUTPUT B (START)
10 A short term, 5 A continuous,
at supply voltage
AUXILIARY OUTPUTs C & D
2 A DC at supply voltage
ELECTRO-MAGNETIC COMPATIBILITY
BS EN 61000-6-2
EMC Generic Immunity Standard for the Industrial Environment.
BS EN 61000-6-4
EMC Generic Emission Standard for the Industrial Environment.
ELECTRICAL SAFETY
BS EN 60950
Safety of Information Technology Equipment, including Electrical Business Equipment.
TEMPERATURE
BS EN 60068-2-1
Ab/Ae Cold Test -30°C.
BS EN 60068-2-2
Bb/Be Dry Heat +70°C.
VIBRATION
BS EN 60068-2-6
Ten sweeps in each of three major axes.
5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn.
HUMIDITY
BS EN 60068-2-30
Db Damp Heat Cyclic 20/55° C @ 95% RH 48 Hours.
BS EN 60068-2-78
Cab Damp Heat Static 40° C @ 93% RH 48 Hours.
SHOCK
BS EN 60068-2-27
Three shocks in each of three major axes 15 gn in 11 ms.
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES
BS EN 60529
IP65 – Front of module when installed into the control panel with the optional sealing gasket.
